W1
(powder flocculant)
instruction manual
[W1 treatment of brush washing water after using water-based paints]]
1
It is a water-based paint sold at a certain major home center.
2
faded postwater on the roof of thepainted with sexual paintI'll try.
3
Wash the brush after painting with water.
Four
It's wash water. It's surprisingly dark.
Five
Put in W1 and separate the dirt.
6
With stirring blades attached to the stainless steel shaft
It is attached to an electric drill and stirred for 1 to 2 minutes.
7
Check the state of separation after primary treatment
Perform secondary processing as needed
8
For secondary processing, mix slowly and roughly.
The clumps of dirt will grow and the water will also be cleaner.
9
You can see that the dirt and water are separated cleanly.
Ten
A filter cloth is attached to the colander and filtered.
11
After filtering, squeeze it out.
12
After squeezing and a little time passes, it becomes such a polo polo lees.
13
The filtered water is so clear.
14
It is pH 6-7 neutral.
Before and after stain separation.
Dry the squeezed lees for a few days and throw them away.
Note: Please dispose of the lees according to the regulations of your local municipality.